PRIME Series PVC Fascia

Finish your deck with a clean, polished look using IPATIO PRIME foamed PVC fascia boards. Available in 12-foot lengths and multiple colours including Teak, Stone, and Chocolate, these fascia boards conceal exposed deck framing and joist ends for a professional appearance.

Made from closed-cell foamed PVC, our fascia boards resist moisture, rot, insect damage, and UV fading — no painting or staining required. They maintain their finish through harsh Canadian winters and hot summers alike, making them the ideal low-maintenance deck trim solution.

Which part do you need? Fascia boards cover the outside face of the deck frame and the joist ends. Deck boards are the walking surface above them, and stair nosing finishes the front lip of each step. Most decks use all three, in one colour.

How much to order: measure the perimeter you want to cover — the length of every exposed side, plus the sides of the stair stringers — and divide by 12 feet to get the number of boards. Add one board for cuts and corners, and order them together so the colour matches from batch to batch.

Easy to cut and install with standard woodworking tools. Free shipping on most orders over $88*.

PVC fascia FAQ

What does a fascia board do on a deck?

A fascia board covers the outside face of the deck frame and the ends of the joists, so the edge of the deck reads as a finished line instead of framing lumber. It is trim rather than structure — the deck boards carry the load above it — and most decks also run fascia down the sides of the stair stringers. Because the board is closed-cell foamed PVC, it can sit close to the ground or against a planter without rotting, which is what usually destroys a wood fascia first.

How many 12 ft fascia boards do I need?

Measure every exposed side of the deck, add the sides of the stair stringers, and divide the total by 12 ft — that is the number of boards. Add one board for cuts, corners and mitres. Order them in one go: colour can vary slightly from one production batch to the next. If a side runs longer than 12 ft, plan where the joint falls — over a joist or a block — and keep it away from the most visible corner.

Do the fascia boards match the deck boards, and can I cut them?

Yes. The IPATIO PRIME fascia boards are the same closed-cell foamed PVC and come in every colour the PRIME deck boards are stocked in — Teak, Stone, Chocolate and Mahogany — plus Milk Tea, so a deck can be finished in one colour from the walking surface to the edge. They cut with ordinary woodworking tools: use a fine-tooth blade, support the board close to the cut, and leave a small gap at butt joints because PVC expands in heat and contracts in the cold. Nothing needs painting, staining or sealing afterwards.

*Conditions apply. See our Shipping Policy for details.