Garage & Shed Accessories
These are parts for a shed, garage or shelter you already own, and the first thing to settle is which building they were made for. The Arrow accessories here - anchor kits, floor frame kits, steel base kits, roof strengthening kits, a door tune-up kit and two shelf kits - are built for Arrow buildings, and most of them name the exact shed sizes they fit in their own titles. The ShelterLogic items are anchoring systems and a roll-up door kit for ShelterLogic fabric shelters, plus an automatic vent. The Gazebo Penguin permanent anchors come as a set of four, and the one Sojag item is a fabric enclosure kit for a 12 x 20 ft Samara carport. None of these is a universal part, so read the title against your own building before ordering.
Two things are easy to confuse here. A floor frame kit is hot-dipped galvanized steel framing and nothing else: it lifts the shed floor clear of grass, gravel or bare earth so water drains away and what you store stays dry, and you cut and fit your own plywood on top - Arrow asks for exterior-grade, 5/8 in. minimum, made with a waterproof adhesive. A steel base kit is the frame that goes under the shed itself, to start it square and level. Both are sold by shed family and footprint, so Classic, Select, Elite, EZEE Shed, Spacemaker and Yardsaver each have their own, and the size list in the product name is the part to match. The shelf kits work the same way: they are brackets and telescoping wall braces, and you supply the board - the three-tier kit takes shelves 8 or 12 in. deep and up to 36 in. long, and carries 85 lb evenly spread.
Winter is what the roof strengthening kits are for. They add roof beams and gable braces that raise the snow load an Arrow shed will carry, they fit most new or existing Arrow buildings except the swing-door models, and they are much easier to put in while the shed is going up - adding one to a shed that is already standing can mean taking part of the roof apart. Anchoring is chosen by what is under the building: the concrete anchor kit bolts four steel corner gussets to a slab and brings its own 1/4 in. masonry bit, the auger and earth anchor kits screw into soil, and ShelterLogic's Ratchet-Tite, Easy Hook and ShelterAuger XL systems tension a fabric shelter down. Free shipping on most orders over $88*.
Related: Sheds, Garages, Carports & Shelters
*Conditions apply. See our Shipping Policy for details.
Shed Accessory FAQ
Will these accessories fit my shed?
Only if they were made for it. Almost everything on this page is brand-specific and most of it is size-specific as well. The Arrow kits are for Arrow buildings: the floor frame kits and steel base kits list the exact footprints they suit, so a kit for a 10 x 12, 10 x 13 and 10 x 14 ft shed will not do for a 6 x 5. The roof strengthening kits fit most new or existing Arrow buildings but exclude the swing-door models, which is stated in their titles. The ShelterLogic anchoring systems and the Pull-Eaze roll-up door are for ShelterLogic fabric shelters. The Sojag enclosure kit fits one carport, the 12 x 20 ft Samara, and the carport is not included with it. The two things that are genuinely general-purpose are anchoring into ground you choose and the shelf brackets, which need only a wall to brace against. If your shed is a brand we do not list, measure first and ask us before ordering.
Does a floor frame kit come with a floor?
No, and this catches people out. An Arrow floor frame kit is metal framing only - hot-dipped galvanized steel sections that bolt into a rectangle under the shed and raise the floor above grass, gravel or bare earth so water runs under it instead of sitting in it. The floor itself is yours to add: Arrow asks for exterior-grade plywood, 5/8 in. minimum thickness, bonded with a waterproof adhesive, and recommends a material that has not been pressure-treated. Budget for the plywood and the cuts when you order the kit. A steel base kit is a different product again: it is the frame the shed is built on, there to get the building square and level from the first panel, and it also does not include a floor.
Can I add a roof strengthening kit to a shed that is already built?
Usually yes, but it is work you would rather do once. The kits are designed to fit most new or existing Arrow buildings, and Arrow's own recommendation is to install one during the shed's initial assembly; fitting it afterwards may mean partially disassembling the roof to get the extra beams and gable braces into place. The swing-door models are excluded. What the kit buys you is snow load: extra beams across the roof and braces at the gables, so the roof carries more of a Canadian winter before it has to be swept. If a shed is already up and the forecast is heavy, clearing snow off the roof is still the thing to do, kit or no kit.
32 products
Guides for Garage & Shed Accessories
All guides-

Shed Foundations in Canada: Gravel Pad, Concrete Slab or Floor Frame Kit
Most steel sheds that fail early in Canada fail from the bottom up. This guide covers sizing the pad from the real foundation footprint, the four base types that work in a Canadian backyard, and the anchoring and snow-load details that keep a shed square.
-

Best Outdoor Structures for Canadian Winters: Carports, Garages & Sheds
Need year-round vehicle and equipment protection in Canada? Compare steel carports, portable garages (ShelterTube vs ShelterCoat), and permanent steel buildings. Snow load ratings, climate zone recommendations, and sizing guides for every Canadian province.
-

Snow Load Ratings Explained: What PSF Means for Canadian Carports & Garages
Snow load ratings are the most useful spec on a carport, portable garage or utility shelter — and the one buyers most often skim past. Here is what psf actually measures, which ratings really exist on the Canadian market, and how to match one to the winter your address gets.
-

How to Set Up a ShelterLogic Portable Garage: Complete Assembly Guide
Complete step-by-step assembly guide for ShelterLogic portable garages. Covers ShelterCoat and ShelterTube models with tools needed, Canadian climate considerations, and the 7 most common mistakes to avoid.
-

Large Metal Sheds in Canada: 10x14 to 14x17 Compared
The step up from a 10x12 changes much more than floor area: the doors get wider but not taller, the base stops being optional and the kit arrives on a freight truck. We compare the large metal sheds we sell in Canada on area, height, door opening, pad footprint and delivery weight.
-

What Size Storage Shed Do You Need? 8x6 to 12x12 in Canada
An 8x6 shed is Canada's default size, but the door opening decides what actually fits inside. This guide compares the real interior dimensions, door widths and foundation pads of steel sheds from 4x3 to 12x12, with snow-load and permit advice for Canadian yards.
























Login and Registration Form
Sign in before you order so your purchase earns points. Orders placed while signed in earn points once they’re complete. Checking out as a guest? Create your account on the order confirmation page and that order is added to it. Every 100 points takes $1 off a later order. About Club IPATIO
Create your account to earn 100 points right away, plus 100 more if you subscribe to our newsletter. Your account also earns points on purchases once each order is complete, and for product reviews. Every 100 points takes $1 off a later order. About Club IPATIO